We have gained expertise in manufacturing of Multifunction Process Calibrator, which is equipped with auto-stepping and auto-ramping for remote testing. Our clients can avail from us Digital Process Meter (DMM/Calibrator) and Digital Process Meter (DMM/Calibrator) (PM-29), which are manufactured as per international quality standards making use of top quality raw materials. Additionally, these are highly appreciated for its wide range of apprehensive features such as high efficiency, high durability and longer service. Our clients can avail these equipments at highly reasonable price.

Digital Process Meter (DMM/Calibrator)

Item Code: PM-28

Technical Specifications :

All the specifications apply to +18ºC to +28ºC, 10% to 70%RH unless stated otherwise. All specifications assume a 5 minute warm-up period. Standard specifications is valid for one year.

DC Voltage Measurement

Range (DCV)	Resolution	Accuracy ± (% of reading+counts)
4.000V	0.001V	0.2%+4
40.00V	0.01V	0.2%+4
400.0V	0.1V	0.2%+4

Measuring Impedance	10MW (nominal) <100pF
Common mode rejection ratio	50Hz or 60Hz > 100dB
Normal mode rejection ratio	50Hz or 60Hz > 45dB
Over voltage protection	600Vp-p

Send Enquiry

Digital Process Meter (DMM/Calibrator)

Item Code: PM29

General Specifications :

Power Supply	6V batteries (4×1.5 V alkaline AAA batteries or 4×1.5 V Ni-MH AAA batteries)
Maximum Voltage	(Maximum Voltage between all input jacks and earth ground) 30V DC (Maximum Voltage between all output jacks and earth ground)
Operating temperature	0°C – 50°C
Operating relative humidity	<80% RH
Storage temperature	-10°C-55°C
Storage humidity	<90% RH
Size	205x95x42mm (plus protector)
Weight	About 500g (plus protector)
Accessories	A copy of users manual, a set of industrial test lead (with alligator clips) and two 63mA/250 fast-blow fuses
Options	Battery charger (VCCHG)
Safety	Complied with IEC61010 terms (Safety Standard issued by international Electro-technical Commission)

Technical Specifications :

All the specifications apply to +18ºC to + 28ºC, 10% to 70%RH unless stated otherwise.
All specifications assume a 5- minute warm-up period.
Standard specifications is valid for one year.

Send Enquiry

Global Instruments
Mr. Rahul Baid (Director)
No. 1688, Upper Ground Floor, Gali Jog Dhian Bhagirath Palace, Chandni Chowk
Delhi - 110 006, India

Contact via E-mail