Global Instruments
Global Instruments
Chandni Chowk, New Delhi, Delhi
GST No. 07ACEPB2404P1ZT
TrustSEAL Verified
Call 08048763393 67% Response Rate
SEND EMAIL
 

New Items

Mextech AM45 Digital Anemometer

Mextech AM45 Digital Anemometer
  • Mextech AM45 Digital Anemometer
Get Best Quote
Approx. Price: Rs 1,800 / UnitGet Latest Price
Product Brochure

Product Details:

Model Name/NumberAM45
Display TypeLCD Display with bar graph Indication
BrandMextech
Auto Power OffAfter 10 minutes from last key operation
Operating Temperature & Humidity0 deg C-40 deg C,45% to 80% RH.
Storage Temperature & Humidity-20 deg C-60 deg C,45% to 80% RH
Power Supply1pc X 9 Volt Battery
Display Size40 X 30 mm
Unit Size180 X 50 X 40 mm
Weight130 gms (Including Batteries)
AccessoriesInstruction Manual,Carrying Case

Application :
  • Widely used for Boilers, Refrigeration Industry Ventilation Duct, Environment monitor, Navigation
  • Measurement, Weather Forecast & Fire Department.

Specification :
  1. Air Velocity : m/s, km/h, ft/min, knots, mph.
  2. Temperature Measurement : °C & °F
Air VelocityRangeResolutionAccuracy
m/s (meters per sec)0.8-30.00.1 m/s± 5%
km/h (kilo-meters/hour)1.4-108.00.1 km/hr± 5%
ft/min (feet per minute)78-59000.1 ft/min± 5%
knots (nautical MPH)0.8-58.30.1 knots± 5%
mph0.9-67.20.1 mph± 5%

TemperatureRangeResolutionAccuracy
°C-10 °C TO 60°C0.1 °C± 2%
°F14 °F TO 140°F0.2 °F± 2%

Features:
  • Data Hold Function.
  • Max, Min & Average Testing Value.
  • Low Temperature Indication.
Request
Callback
Yes! I am Interested

Mextech CM-801E Coating Thickness Meter

Mextech CM-801E Coating Thickness Meter
  • Mextech CM-801E Coating Thickness Meter
Get Best Quote
Approx. Price: Rs 12,500 / UnitGet Latest Price
Product Brochure

Product Details:

Model Name/NumberCM-801E
BrandMextech
DisplayLCD Display
Accuracy+-2~3%n or +-2.5um
Range0~1350um/0~53mil
Resolution0.1um/1um

Front Panel Discription:
  • Fe—Magnetic substrate indicator: Steel/Iron
  • NF—Non-magnetic substrate indicator: Copper/Aluminum
  • Battery level indicator
  • Measured Reading Display
  • Continuous Measurement indicator
  • Unit: um, mil
  • ON/OFF; Down Key: Decreasing for Calibration
  • Um/mil: Unit Switch Key; Up Key: Increasing for Calibration;
  • ZERO: Zero Calibration Key
  • MODE: Switch betweenSingle-point Mode and Continuous Mode
  • RESET: System Resetting Key (Press and Hold More than 8s)
  • Probe

 

Measurement Modes:

  • Single-point Mode: the Single Mode (Default), Press “MODE” key to switch to Single-point
  • Mode (no Continuous Measurement indicator displayed), Vertically and rapidly placing the
  • probe on the sample. The readings display on LCD with one beeping. Hand up the probe more than 5cm away from the mental, then do the next measuring.
  • Continuous Mode: the Continuous Measurement Mode, Pressing “MODE” key to display the
  • Continuous Measurement indicator, vertically and directly placing the probe on the sample.
  • The readings will continuously upgrade following with the probe moving.

 

Description of “Fe” and “NF”
  • “Fe” in LCD means: Target substrate is ferrous material such as iron/steel.
    “NF” in LCD means: Target substrate is non-ferrous material such as aluminum/copper.

 

Unit Switching

  • Press “um/mil” key to switch unit “um” or “mil”

 

Auto Power Off

  • Automatically power off without any operations within 10min.

 

Calibration:

  • Calibration adjustment is the process of setting the gauge to be more accurate. There are factors to affect accuracy such as the probe slight wear, long time no use, hostile environment, or special substrate. How to calibrate the gauge, steps as follows:
  • Firstly take out the two pieces of substrates (ferrous substrate/ aluminum substrate) and the standard foils. Place them horizontally on the table. You also could use your target bare metal substrate instead of our attached substrates.
  • Then press the probe tightly on the substrate, and press the ZERO key to finish the zero calibration.
  • Note: The calibration includes “ZERO Point”&“Multi-Point” Calibrations. Please seriously note this. Once you did a misoperation, please press and hold “MODE/RESET”8 seconds for resetting the factory default.

 

System Reset:

  • Press and hold “MODE/RESET” key for about 8 sec until the “Nf 0” displays with 3 beeping.
  • Then press the sensor tightly on the aluminum substrate and press the ZERO Key. The “F 0” displays, and then press the sensor tightly on the iron substrate and press the ZERO Key. The system resetting is successful.
  • Note: system resetting is mainly used for the return of error operation & error calibration.

 

Multi-Points Calibration:

  • Gauge should be in Single-point Mode. Place the probe on coated sample (for example, our foils on substrates) and raise it after one beep. The LCD will show “X”, 56.3 for example. Press the
  • Up key or Down key to adjust the displayed valueas the indicated value on the foil. Repeat this step with different foils until the measured value is close to the indicated value on each foil. (It is suggested to begin from the 100um foil.) The Multi-Points Calibration is done.
Request
Callback
Yes! I am Interested

Mextech DT-115 Digital True RMS Multimeter

Mextech DT-115 Digital True RMS Multimeter
  • Mextech DT-115 Digital True RMS Multimeter
Get Best Quote
Approx. Price: Rs 1,250 / UnitGet Latest Price
Product Brochure

Product Details:

Model Name/NumberDT-115
BrandMextech
AccessoriesInstruction Manual, 3 X AAA Batteries, 1Set Test lead, Temperature Probe
Weight190gm Excluding Battery
Display3 3/4 Digits with 5999 Counts With Backlight
Sampling Time0.4 Seconds
Auto Power Off (mins)15
Operating Temperature & Humidity0 deg C to 40 deg C,45%-80%RH
Storage Temperature & Humidity-20 deg C To 60 deg C,45%-80%RH
Power Supply3 X AAA Batteries
Display Size47 X 30 mm
Unit Size148 x 69 x 44 mm

This is a 33⁄4 Digit 6000 Counts True RMS Multimeter With Backlight & Touch. It Perform AC/DC Voltage, AC/Dc Current, Frequency, Resistance, Capacitance Etc.

Specification:
Basic Function Range Best Accuracy
AC Current 10A (3 Ranges) ±3.0% in A/ ±1.5% in μA, mA
DC Current 10A (3 Ranges) ±2.0% in A/ ±1.0% in μA, mA
AC Voltage 600V (2 Ranges) ±1.5%
DC Voltage 600V (2 Ranges) ±0.5%
Resistance 60MΩ (Auto Range) ±0.8%
Capacitance 99.99mF(Auto Range) ±3.0%
Frequency 10KHz (2 Range) ±2.0%
Duty Cycle 10~95% ±2.0%
Temperature -30~1000°C ±2.0%
Continuity Yes

Features:
  • Over Range Indication,
  • Overload Protection
  • Fuse Protection
  • Wall Mount & Table Type
  • Data Hold Function
  • Auto/Manual Ranging
  • Non Contact AC Voltage Detector.(NCV)
Request
Callback
Yes! I am Interested

Digital Dual Display Clamp Meter

Digital Dual Display Clamp Meter
  • Digital Dual Display Clamp Meter
Get Best Quote
Approx. Price: Rs 5,000 / UnitGet Latest Price
Product Brochure

Product Details:

Model Name/NumberDT-2003A
BrandMextech
AC Current400 A-2000 A
Usage/ApplicationIndustrial
DC Voltage60 mV-1000 V
Jaw Open16 mm, 56 mm
Resistance600 Ohm-60 M Ohm
Operating Temperature-20 Deg C-1000 Deg C
Capacitance40 nF-4000 uF
Frequency Hz10 Hz-10 MHz
Duty Cycle0.1%-99.9%


Request
Callback
Yes! I am Interested

Mextech DT-117 Digital Multimeter

Mextech DT-117 Digital Multimeter
  • Mextech DT-117 Digital Multimeter
Get Best Quote
Approx. Price: Rs 1,800 / UnitGet Latest Price
Product Brochure

Product Details:

Model Name/NumberDT-117
BrandMextech
Dimension185 x 85 x 52 mm
AccessoriesInstruction Manual,9V Battery,1Set Test lead,1 pc 9V Battery
Weight368gm Excluding Battery
Display3 3/4 Digits with 5999 Counts With Backlight
Sampling Time0.4 Seconds
Operating Temperature & Humidity0 deg C To 40 deg C,<75%RH
Storage Temperature & Humidity-10 deg C To 50 deg C,<75%RH
Power Supply1 X 9 Volt Battery
Display Size62 X 35 mm

This is a 33⁄4 Digit 6000 Counts True RMS Multimeter With Backlight It Perform AC/DC Voltage, AC/Dc Current, Frequency, Resistance, Capacitance Etc.

Specification:
Basic FunctionRangeBest Accuracy
AC Current20A(2 ranges μA, mA, A)±3%
DC Current20A(2 ranges μA, mA, A)±2.0%
AC Voltage750V(Auto Range)±1.5%
DC Voltage1000V(Auto Range)±0.5%
Resistance60MΩ(Auto Range)±1.5%
Capacitance60mF(Auto Range)±3.0%
Frequency60MHz (Auto Range)±1.5%
Duty Cycle10~95%±2.0%
Transistor hfE DiodeYes
ContinuityYes
NC AC Voltage Detector90-1000V

Features:
  • Over Range Indication,
  • Overload Protection
  • Data Hold Function
  • Auto/Manual Range Selection
  • Non Contact AC Voltage Detector.
  • Auto Power off
Request
Callback
Yes! I am Interested

Mextech DT-603 True RMS Digital Multimeter

Mextech DT-603 True RMS Digital Multimeter
  • Mextech DT-603 True RMS Digital Multimeter
Get Best Quote
Approx. Price: Rs 1,250 / UnitGet Latest Price
Product Brochure

Product Details:

Model Name/NumberDT-603
BrandMextech
AccessoriesInstruction Manual,Test Leads,9V Battery,Temperature Probe,Company Calibration Certificate
Weight380 gms including battery
Display3 5/6 digits 6000 Count LCD Display
APOAfter 15 Min From last key operation
Operating Temperature & Humidity0 deg C to 40 deg C,45% to 80% RH
Storage Temperature & Humidity-20 deg C to 60 deg C,45% to 80% RH
Power Supply9V Battery
Unit Size195 X 92 X 55 mm
Display Size61 X 35 mm

This is a 35⁄6 Digit 6000 Counts True RMS Multi Range Digital Multimeter. It Performs AC/DC voltage, AC/DC Current, Capacitance, Frequency, Resistance, NCV etc.

Specification:
FunctionRangeBest Accuracy
AC Voltage6V/60V/600V/750V± 1.0%
DC Voltage600mV/6V/60V/600V/1000V± 0.5%
AC Current6mA/60mA/600mA/10A± 1.5%(up to 600mA), ± 3.0%(in A Range)
DC Current600μA/6mA/60mA/600mA/10A± 1.0%(up to 600mA), ± 2.0%(in A Range)
Resistance600Ω/6kΩ/60kΩ/600kΩ/6mΩ/60MΩ± 0.8%
Capacitance100mF (Auto Range)± 3.0%
Temp.-20°C To 1000°C± 1.5%
Frequency10mHZ± 1.5%
Transistor, HFE0 to 1000
Duty Cycle1% to 99%
NCV90 – 1000V AC
DiodeYes
ContinuityYes

Features:
  • Low battery Indication
  • Diode and Continuity test
  • Data hold & Back Light
  • Fuse Protection
  • Overload Protection
Request
Callback
Yes! I am Interested

Mextech TC9 Visual Infrared Thermometer

Mextech TC9 Visual Infrared Thermometer
  • Mextech TC9 Visual Infrared Thermometer
Get Best Quote
Approx. Price: Rs 50,000 / UnitGet Latest Price
Product Brochure

Product Details:

BrandMextech
Model Name/NumberTC9
EmissivityAdjustable 0.1-1.0
Size/Dimension212 mm x 95 mm x 62 mm (LxWxH)
Display Screen2.4" Full-Angle High Resolution Color Screen
Resolution of Infrared Image32 X 32 (1024 Pixels)
Resolution of Visible Image0.3 mega Pixels
Field Angle/Shortest Focal Distance33 X 33/0.5m
Thermal Sensitivity0.3 deg C
Range of Temperature Measurement-20 deg C To +500 deg C
Accuracy of Temperature Measurement+-2% or +-2 deg (+-2% or +-4 deg F)
Image Capturing Frequency9Hz
Range Of Wave Length8-11.5 um
Focal DistanceFixed Focal Distance
Color PaletteIron Red,Rainbow,Rainbow high Contrast,Grey Scale(Black Glow) & Grey Scale (White Glow)
Vision Option25% Step Infrared to visional to Infrared and Visional Image.
Memory Card8GB USB Cable
File FormatBMP
Power SupplyAA Battery * 4pcs
Auto Power off Time12 Minutes
AuthenticationCE(EN61326-12006)

Application:
  • This Thermal Imaging Camera combines the Function of Surface Temperature Measurement and real Time Thermal Imaging.To improve Recognition this product is equipped with a vision camera.
  • Based on practical Requirements, It can turn thermal image into visional image. TC9 is the optimal Product for Agriculture, Electrician and maintainer and Easy to Operate.
Request
Callback
Yes! I am Interested

Mextech DT-36T Digital Clamp Meter

Mextech DT-36T Digital Clamp Meter
  • Mextech DT-36T Digital Clamp Meter
Get Best Quote
Approx. Price: Rs 2,250 / UnitGet Latest Price
Product Brochure

Product Details:

Model Name/NumberDT-36T
BrandMextech
Weight340gm Including Battery
Dimension208 x 78 x 35 mm
Display33/4 Digits with 3999 Count With Backlight & Torch
Operating Temperature and Humidity5 deg C To 35 deg C,<80%RH
Storage Temperature & Humidity-10 deg C To 50 deg C,<80%RH
Clamp Jaw Opening Size25mm
Power Supply1 X 9 Volt Battery
AccessoriesInstruction Manual,1 pc 9V Battery,1Set Test lead,Carrying Pouch

This is a 33⁄4 Digit 600A AC DC True RMS Clamp Meter with AC/Dc Voltage, Resistance, Frequency, Capacitance etc.

Specification:
Basic FunctionRangeBest Accuracy
AC Current60A/600A±2.5%
DC Current60A/600A±2.5%
AC Voltage6V/60V/600V±1.0%
DC Voltage600mV/6V/60V/600V±0.8%
Resistance600Ω/6kΩ/60kΩ/600kΩ/6mΩ/60mΩ±1.2%
Capacitance6nF/60nF/600nF/6μF/60μF/600μF/6mF/60mF±3.0%
Frequency100Hz – 10MHz±1.0%
Duty Cycle0.1%~99.9%±3.0%
NC AC Voltage Detection (NCV)Yes
Diode & ContinuityYes

Features:
  • Non Contact AC Voltage Detector
  • Low Battery Indication
  • Overload Protection
  • Over Range Indication
  • Auto/Manual Ranges
Request
Callback
Yes! I am Interested
X

Explore More Product



Reach Us
Rahul Baid (Director)
Global Instruments
1690, 1st Floor, Sunder Bhawan Building, Gali Jog Dhian, Bhagirath Palace
Chandni Chowk, New Delhi - 110006, Delhi, India


Call Us


Send E-mailSend SMS